aquarium CO2 external atomizer with bubble counter W05-05 series

Instructions for use
1: Install the product in the outlet pipe of the filter unit, and then open the filter.
It is recommended to tilt the air pipe connection downward during installation. If the air pipe connection faces upwards and there is air inside the product, please loosen the metal cover of the acrylic glass and ventilate it slightly, and then tighten it immediately after ventilation.
2: Install the carbon dioxide equipment and air pipeline, open the fine adjustment valve on the bubbler, and keep it for 5-10 minutes, let the high pressure gas fully open the air hole, and then fine-tune the adjustment valve to the normal air outlet.

Material: aluminum alloy + pressure grams
Features: Vientiane rotates 360 degrees, regardless of the connection of the water pipe, it can be kept vertical,

Standard Edition:
W05-05-12 (CO2 pipe diameter: inner diameter 4mm outer diameter 6mm) (water pipe diameter: inner diameter 12mm outer diameter 16mm)
W05-05-16 (Carbon dioxide pipe diameter: inner diameter 4mm and outer diameter 6mm) (water pipe diameter: inner diameter 16mm and outer diameter 22mm)

Bubble counter version:
W05-05-12A (CO2 pipe diameter: inner diameter 4mm outer diameter 6mm) (water pipe diameter: inner diameter 12mm outer diameter 16mm) with bubble counting function
W05-05-12A (CO2 pipe diameter: inner diameter 4mm outer diameter 6mm) (water pipe diameter: inner diameter 16mm outer diameter 22mm) with bubble counting function

Purchase notice
1: Must use dedicated high-pressure carbon dioxide pipeline
The dedicated carbon dioxide air tube is hard and cannot be tightened by hand. If it is an opaque hose, it cannot be used.
2: Installation location
The recommended installation location is within 1m of the water outlet, and the air bubbles are closest to the water outlet
3: There will be many bubbles when using this product,